Full Car Audio System Installation - Speakers, Subwoofer and Amplifier

author Quality Mobile Video   2 год. назад

12,095 Like   677 Dislike

Wiring a 2 or 4 channel amp to your stock speaker harness without cutting the factory wiring

Lorenzo shows you how to wire your speakers to your factory wiring harness, being powered by the head unit's amplifier or an aftermarket Kenwood amplifier. He shows a 2 channel set up and a 4 channel setup! Video Chapters: 0:25 Run Speaker Wires from Amp to Stock Head Unit 1:00 Wire Output of Amp to Wiring Harness 1:15 Pre-Install Layout 2:00 Disassemble Harness 2:35 Identify Front Speaker Leads on Harness 3:00 Label Speaker Wires 4:05 Strip Speaker Wires 4:40 Prepare Heat Shrink Tubing 4:55 Identify Positive and Negtive wires to Properly Match 5:10 Solder Front Speaker Connections and add Heat Shrink 6:00 Remote Turn On Lead - Do You Need it for Speakers, Amp, or Power Antenna 6:55 Lay Out Harness and Remote Turn On 7:15 Solder Spade Connection to Remote Turn On Lead 7:40 Insulate Unused Wires 8:40 Tape Up Finished 2 Channel Harness - Create T-Harness 9:55 Make 2 Channel Connection to Amplifier 10:25 Connect RCA's from Stereo to Amplifier 10:50 Completed 2 Channel System 11:05 Wire a 4 Channel System - Now Adding Rear Speakers 11:35 Disassemble Harness (AGAIN!) 11:45 Disconnect Rear Speaker Connections from Aftermarket Harness 12:00 Strip, Solder, Heat Shrink Rear Speaker Connections 13:20 Set Up New T-Harness with Tesa Tape 14:08 Make 4 Channel Connections to Amplifier, starting with Rear Speakers First Parts: Car Stereo Wiring Harnesses http://www.qualitymobilevideo.com/car-audio/car-audio-installation/wiring-harness.html?utm_source=YouTube&utm_medium=Video&utm_campaign=Wire-Speakers-To-Factory-Harness Car Stereo Interfaces http://www.qualitymobilevideo.com/car-audio/car-audio-installation/wiring-harness/steering-wheel-interface.html?utm_source=YouTube&utm_medium=Video&utm_campaign=Wire-Speakers-To-Factory-Harness Car Stereos - Single Din and Double DIN http://www.qualitymobilevideo.com/car-audio/car-stereo.html?utm_source=YouTube&utm_medium=Video&utm_campaign=Wire-Speakers-To-Factory-Harness Klein Tools Crimper http://www.qualitymobilevideo.com/klein-1006.html?utm_source=YouTube&utm_medium=Video&utm_campaign=Wire-Speakers-To-Factory-Harness Tesa 3/4" Cloth Tape http://www.qualitymobilevideo.com/51618.html?utm_source=YouTube&utm_medium=Video&utm_campaign=Wire-Speakers-To-Factory-Harness Visit www.QualityMobileVideo.com for all of your car audio and video needs! Music by Wake The Wild: www.WakeTheWild.com Instagram: @qualitymobilevideo Twitter: @qualitymobilevi Facebook: https://www.facebook.com/qualitymobilevideocom-292229920826823

Avoid these 5 common Car Audio NOOB Mistakes!

In any hobby there are common mistakes that all newcomers make, what are five common mistakes in car audio? How can we better install our subwoofers, amplifier, radio, speakers and wiring? Avoid these five mistakes! Custom Subwoofer Box Build VIDEO: https://goo.gl/vC9Qkn Electrical Upgrades VIDEO: https://goo.gl/Yfqfpg ▼ Other important links: ➜FREE weekly training program: http://goo.gl/5T4D7v ➜Box Designs, BUILD YOUR OWN BOX! http://goo.gl/sv1wam ➜Support the making of the Videos: https://goo.gl/2jMVZ6 Disclaimer: Some links may lead to affiliate sites or sponsors. By purchasing through the links your purchase helps support the channel. Thank you for your support! Here at Car Audio Fabrication I teach you how to Master Car Audio in an effort to Design, Build, and Install your ideal car audio system. Whether you are a hardcore basshead or a HiFi focused audiophile I would love to have you subscribe and join our community! --SUBSCRIBE-- http://www.youtube.com/subscription_center?add_user=caraudiofabrication --SUPPORT— Early Access to Videos, Secret Videos, Direct Messaging for Questions: Patreon CAF Group: https://www.patreon.com/caraudiofabrication --LET”S CONNECT!— Website: http://www.caraudiofabrication.com/ Facebook: http://www.facebook.com/caraudiofabrication/ Instagram: @caraudiofab Snapchat: @caraudiofab --FULL VIDEO SERIES-- Simple Door Pods [VIDEO] Series: http://goo.gl/jPpKGB Custom Sub Box [VIDEO] Series: http://goo.gl/bzZPwl Underseat Fiberglass Sub Box [VIDEO] Series: http://goo.gl/OBbUwH Fiberglass Door Pods [VIDEO] Series: http://goo.gl/oAdrx1 Music: Switch It Up - YouTube Audio Library Dark Lotus Sting - YouTube Audio Library Licensed under Creative Commons: By Attribution 3.0 Car Audio Fabrication – Master Car Audio – Design, Build, Install

Installing an Amplifier & Subwoofer: Geek Squad Autotechs

In this segment of Geek Squad Installs, Autotech Agent Alan will show you the tools, parts, and know-how needed to do a common teardown and install of a subwoofer and amplifier in your vehicle. (Part of our ongoing "Geek Squad Installs" series.)

16 CRAZY VEHICLES You Have to See to Believe

Which one of these 16 crazy vehicles do you like the best? Let us know your favorite vehicle in the comments below! Check out our most popular playlists! ⭐ https://goo.gl/KdumQF Connect with us on YouTube! 😀 https://goo.gl/fqrncD Subscribe to Minds Eye Design! 🔔 https://goo.gl/S8IpFj Check out our video collection! 👈 https://goo.gl/UXobsF FEATURED CRAZY VEHICLES ⭐ #16 00:07 Flatmobile - The flatest car in the world This crazy, crazy "Flatmobile" is going to enter the Guinness books as the flattest vehicle ever. How flat is it? Nineteen inches. Not only is this Batmobile-like contraption dangerous, It's also street legal, but we wouldn't want to be in it during a rollover....well we just wouldn’t want to be in it. #15 00:38 Pea Car Pea Car took 6 weeks to build The Pea Car was the brainchild of Matt Waller and Dave Monk, a creative team at BBH Advertising for a birds Eye campaign. It weighs about 1600 lbs, has no gears and it was based on the chassis of an off-road go-cart. #14 01:10 1959 Dodgem Bumper Car a 700 cc bumper car with everything from gauges to a custom exhaust. The 1959 Dodgem Bumper Car looks like it was built on a four wheeler chassis and completely customized from head to toe. #13 01:49 ZIL Amphibious Screw Vehicles This screw-propelled vehicle is an amphibious vehicle designed to cope with difficult snow and ice or mud and swamp. It’s the rotation of one or more auger-like cylinders fitted with a flange that engages with the surface. #12 02:43 hyundai egg car Hyundai has a new concept for the car of tomorrow - and it doesn’t involve wheels. The ‘E4U’ is an egg-shaped, open-topped single person transport similar to a Segway. #11 03:20 1914 ALFA 40-60 HP Castagna The ALFA 40/60 HP is a road car and race car made by Italian car manufacturer ALFA (later to become Alfa Romeo). This model was made between 1913 and 1922 and was designed by Giuseppe Merosi, as were all other Alfas at that time. #10 3:54 Courreges Zooop EV The Zooop is a high performance 150 kW three seat electric car that weighs just 1,521 pounds and has a range of 280 miles. #9 04:36 Bond Bug The Bond Bug is a small British two-seat, three-wheeled automobile which was built from 1970 to 1974, initially by Bond Cars Ltd and subsequently by the Reliant Motor Company. It is a wedge-shaped microcar, with a lift-up canopy and side screens instead of conventional doors. #8 05:23 EDWARD Diwheel Engineering students at the University of Adelaide on the southern coast of Australia have developed an electric powered diwheel called EDWARD. This two wheel setup can drive the passenger at up to 25 miles per hour, but its biggest feature is its desirability that everyone who watched it, wants to take a ride. #7 06:17 Lil Red Wrecker Back in the 70s, customizer George Barris built comedian Redd Foxx an amazing custom tow truck called the Li’l Red Wrecker. This all hand built body is made of metal and sculptured with the tilt styled front cab tinted sky top window and all. #6 06:59 Space Shuttle Cafe Truck The Space Shuttle Cafe, is "the only road worthy DC3 Airplane licensed for street use in the world (that we know of) , painted in the theme of NASA's Space Shuttle." #5 07:41 Pussycar Automodule We are in the middle of the late 1960s, when Jean Pierre Ponthieu presented his "Automodule" at the height of emancipation and student protests. The ball vehicle, reminiscent of a lunar vehicle, was even built 10 times - and it became, infamous through an advertising campaign. #4 08:25 1958 Zundapp Janus 250 This front/rear-facing prototype was named Janus for the Roman god who faced both ways. Glass sliding side windows and robust construction contributed to an overall weight that was too much for the 14 hp motor and the first examples barely reached 50 mph. #3 09:12 Dynasphere The Dynasphere was a monowheel vehicle design patented in 1930. The vehicle was inspired by a sketch made by Leonardo da Vinci. #2 10:01 lazareth's MOKE amphibie The Mini Moke Amphibious Lazareth is a fun and accessible beach car! Thanks to its 4-wheel drive and its aluminum body, the Moke #1 10:41 Shell Helix Ultra Transparent Car Shell is promoting Shell Helix Ultra oil with “Glass Car”, an integrated advertising campaign featuring a Nissan 370Z sports car made of perspex. The underlying message that Shell Helix Ultra continually cleans and protects your engine. Royalty Free Music 🎧 Corel Video Studio Royalty Free Music 🎧 Karma Code by Traveler & Sinjun https://soundcloud.com/travelermusic MINDS EYE DESIGN SOCIAL MEDIA ✅ Google+ https://plus.google.com/+mindseyedesign YouTube https://youtube.com/mindseyedesign 16 CRAZY VEHICLES YOU HAVE TO SEE TO BELIEVE #design #innovation #inventions #technology #mindseyevideo

Mirage Fix 5 | Watershield, Friction, Sound Deadening

0:36 Door Panel Removal, 1:07 Fix Door Lock Switch, 1:33 Quick Roof Aluminum, 1:37 Fix Speaker, 2:25 Sound Deadening, 3:02 Watershield, Put Panel Back, 8:31 Before & After DDW Website: http://www.DarkDragonWing.com DDW Facebook Page: https://goo.gl/UvpnWC DDW Online Store: https://goo.gl/4hIzKm DDW Free 3D Files: https://goo.gl/1eJPhi Support DarkDragonWing by bookmarking these links and start shopping: eBay https://goo.gl/OuDFKV Amazon http://amzn.to/2osexVv Support DarkDragonWing through Patreon: https://patreon.com/DarkDragonWing Over all improving the tightness of the speakers sound. ------------------------------ This a red 1999 MITSUBISHI MIRAGE 1.5L 4-cyl Engine Code 4G15 AUTO FWD. ------------------------------ 20' Butyl Rubber Glue eBay https://goo.gl/arQ4Xt Quick Roof 6"x25' eBay https://goo.gl/V6AdjO Amazon http://amzn.to/2nQuK7j ------------------------------ 1. Change watershield of the front doors 2. Sound deadening using Quick Roof Aluminum 3. Fix friction, rattle sound noises in door panels with Adhesive Rubber Sealant ------------------------------ Mods on this car: - $71 JVC KD-R540 Stereo System ------------------------------ Songs: 0:26 [HD] Dubstep: Flvor - Lost Senses https://www.youtube.com/watch?v=xd3oRjWcQdw 0:28 Ellie Goulding - Figure 8 (Xilent Remix) https://www.youtube.com/watch?v=rNpBahr49mA ------------------------------ Video By: Krissana Mingkwan Mackey - กฤษณะ มิ่งขวัญ แม็กกี้ Thaweesak Mingkwan Manny - ทวีศักดิ์ มิ่งขวัญ แมนนี่ ------------------------------ Disclaimer: This description section contains affiliate links.

Learn how to install an entire car audio system by yourself! This system only cost $300....

Full Package Bundle Link

Installation Vehicle: 2016 Toyota Corolla

Products Installed:

Kenwood KFC-6995PS 6x9" Speakers

Kenwood KFC-P709PS Component Set

Kenwood P-W120B Subwoofer Amplifier Bundle

Loom Tubing 3/4"

Recommended Amp Installation Kit:

Line Output Converter LP7-2

Klein Tools Crimper http://www.qualitymobilevideo.com/klein-1006.html?utm_source=YouTube&utm_medium=Video&utm_campaign=Kenwood_Install

Tesa 3/4" Cloth Tape

Sound Dampening/Dynamat

Chapters of the Installation:

Finding out what size speakers you need: 0:51
Benefit of Speakers, Amps and Subs: 1:12
First Steps of Install: 2:04
Run Power Wire Through Firewall: 3:15
Removing Rear Seats: 5:10
Removing Rear Deck: 6:30
Making Custom Rear Speaker Adapter Plates: 7:15
Creating Wiring Harness for Rear Speakers: 9:15
Mounting Rear Speakers/Dynamiting: 10:50
Making Rear Speaker Connections: 12:45
Mounting the Amplifier: 13:30
Amplifier and Subwoofer Connections: 15:50
Wiring the Fuse: 17:00
Removing Front Doors and Speakers: 18:00
Making Custom Front Speaker Adapter Plates: 19:30
Assessing Tweeters: 20:35
Dynamiting Front Doors: 21:35
Mounting Speakers and Adapter Plates: 24:15
Creating Custom Wiring Harness for Tweeters: 26:38
Audio Samples of Factory System vs Kenwood System: 28:45

Comments for video: